|
ABRASION RESISTANT
EPF’s hangar floor systems utilize catalyzed, 2-component, polyester aliphatic urethane polyurethane, which offer the highest abrasion resistance possible. Your hangar floor requires a coating system that will stand up over a long period of time to heavy traffic loads. EPF utilizes this topcoat for hangar flooring because protection and ongoing maintenance are essential.
HI-GLOSS APPEARANCE / LIGHT REFLECTIVE
EPF’s hangar floor coatings provide a high-gloss, light-reflecting, easy to clean surface. Our floors will not yellow or dull due to ultraviolet degradation, as do some lesser quality hangar floor coatings. The bright, clean surface allows easy identification of parts or liquids on the floor.
EASY-TO CLEAN
All of EPF’s hangar floor coating systems incorporate an extremely easy to clean finish, making them look new for years to come.
CHEMICAL RESISTANT
EPF’s hangar floor polyurethane topcoat resists all fluids commonly used in aircraft maintenance including
Skydrol. Skydrol, a hydraulic fluid used in aircraft, is a hazardous waste, and is detrimental to the environment. Due to the chemical resistance of the polyester aliphatic polyurethane coatings, Skydrol will not damage the coating, contaminate the concrete, or seep into the ground (as in lesser quality aircraft hangar flooring ).
SLIP-RESISTANCE
In addition to a standard smooth finish,
EPF hangar floor coating system can be textured w/ a non-skid surface,
if desired. This is accomplished with the incorporation of an extremely long-wearing aggregate into the polyurethane system, making the surface texture of the floor coarse, and preventing it from becoming slippery when wet.
|
